Updated Articles

  1. Calibrating the M8000 sEMG Scanners

    Last Updated: 02/19/2018 in Hardware Issues Wired System (M8000)
    Summary This will walk you through the process of calibrating your MyoVision 8000 scanners to the factory default settings. Previously, we sold calibration cables, that accomplished the same task that is now written into the software. You no longer ...

  2. Computer Requirements for M8000

    Last Updated: 02/19/2018 in Hardware Issues Wired System (M8000)
    I’m getting a new computer for the MyoVision 8000 system, what should I know?   Summary  Before you spend money on a new computer for the MyoVision 8000, you need to know a few things about support and compatibility issues for the system. Firs...

  3. Why won't my SoloVision/PhysioMonitor connect to my computer?

    Last Updated: 02/19/2018 in Hardware Issues WireFree System
    There are a variety of reasons why your computer doesn't recognize your SoloVision or PhysioMonitor. This article will walk you through some steps to troubleshoot the issue. Symptoms: "Active Devices" lights on PhysioMonitor not turning on "M...

  4. ScanVision Bottom Enclosure Replacement

    Last Updated: 02/19/2018 in How do I... Hardware Self-Service and Repairs
    Directions on how to replace the bottom enclosure

  5. PhysioMonitor Radio Installation

    Last Updated: 02/19/2018 in How do I... Hardware Self-Service and Repairs
    Directions for replacing a radio in the PhysioMonitor

  6. SoloVision Radio Installation

    Last Updated: 02/19/2018 in How do I... Hardware Self-Service and Repairs
    How to replace the radio in the SoloVision.

  7. How to Import Previous Database (M8000) Using MyoVision software Atlas & Apricot

    Last Updated: 02/19/2018 in How do I... Database Management
    How to import your database after upgrading from M8000

  8. How to Edit Drop-Down Options in Interpretation Reports

    Last Updated: 02/19/2018 in How do I... DynaROM
    Tailor the drop-down options to your preferences. Change it for one specific report or for all of your reports.

  9. How to Calibrate the FlexVision

    Last Updated: 02/19/2018 in How do I... Range of Motion(ROM)
    Calibrate your FlexVision inclinometers and reset their starting point to 0°

  10. Changing the Review Screen Orientation

    Last Updated: 02/19/2018 in How do I... Range of Motion(ROM)
    Change your review screen from forward-facing images to backward-facing silohuettes
Copyright © 2015 – 2016 Your Company, LLC. All rights reserved.