-
Created On: 08/15/2019
in Frequently Asked Questions The Patented MyoVision ScanVision 5 Electrode Adaptive Electrode Static sEMG was designed and patented with a provide the best skin contact possible through the use of a moving ground. This moving ground allows the electrodes to always make s...
-
Created On: 08/10/2019
How to locate Denial Responses for insurance denials.
-
Created On: 07/23/2019
in How do I... How to adjust the amount of time the buttons need to be held in for to place a marker and how long they need to be held to start and advance DynaROM exams.
-
Created On: 07/03/2019
in Hardware Issues Learn how to troubleshoot when the "Bind" light on your SoloVision is blinking.
-
Created On: 07/01/2019
in Frequently Asked Questions Summary This support article explains how to enter the calibration values for your Thermography device. Before you begin, make sure that your Thermography device has been setup in software settings. To do this, click on "Setup" at ...
-
Created On: 07/01/2019
in How do I... Summary This support article explains how to enter the calibration values for your Thermography device. Before you begin, make sure that your Thermography device has been setup in software settings. To do this, click on "Setup" at ...
-
Created On: 07/01/2019
in First Time Set Up Learn how to enter your Thermography calibration values.
-
Created On: 06/24/2019
in Hardware Issues Find out why you can NOT use a laptop charger to power your PhysioMonitor
-
Created On: 05/28/2019
The purpose of this article is to demonstrate how to customize the font size inside the exams to make it easier to read. Click on "Setup" in the top menu, go down to "Reports" and select "Font" A window ...
-
Created On: 05/06/2019
in How do I... This support guide will show you how to change which motion sets are performed during Range of Motion exams.