-
Last Updated: 11/14/2018
in How do I... General Settings Learn how to disable fast boot on your computer. Fast Boot allows your computer to boot faster. It also prevents the computer from fully shutting down causing the computer to slow down.
-
Learn how to change which motion sets are done, during your Range of Motion exams.
-
Last Updated: 11/02/2018
in How do I... General Settings Learn how to add, edit, and remove a doctor's information from the MyoVision.
-
Last Updated: 11/01/2018
in How do I... General Settings This article will guide you through changing the language setting in the MyoVision software. ...
-
This article describes how to connect multiple SoloVisions for use.
-
Last Updated: 11/01/2018
in How do I... General Settings Add your own text and information to the Static or Thermo exam reports.
-
Last Updated: 10/31/2018
in How do I... How to export your exams so that they can be accessed by CRMs such as Atlas and Chirotouch.
-
Last Updated: 09/27/2018
in How do I... How to set the MyoVision software to be compliant for use in Canada.
-
Summary In this guide you will learn how to redo a site during a Static sEMG exam. How to Redo a Static sEMG Site In order to redo a site during a Static sEMG exam all sites must be scanned and the exam must still be in progress. Onc...
-
Summary This article will show you how to locate the serial number for the front-end piece of your ScanVision device. Locating the Serial Number In order to get the serial number for the front-end piece of your ScanVision device, you will fi...